This is Fan Art of the book cover for Harry Potter and the Philosopher's Stone by Olly Moss

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 115.98x175.01mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyLite White Transmission Distance: 5
    PLA PolyLite Red Transmission Distance: 5
    PLA PolyLite Yellow Transmission Distance: 11
 

This print uses 4 unique filaments

wap Instructions:
    Start with Black
    At layer #11 (0.56mm) swap to White
    At layer #24 (1.08mm) swap to Black
    At layer #25 (1.12mm) swap to Red
    At layer #28 (1.24mm) swap to Yellow for the rest.