Detroit Lions floating logo sign. THIS IS A MULTI-PART LOGO, that means it does not require an AMS/MMU! This is so the texture of the textured plate will be on the front of all the parts of the sign and to help achieve a 3 dimensional look as all the colors are different thicknesses. The different components (if large enough) are modeled with connecting pins to achieve a press fit, but a bit of CA glue doesn't hurt (ProTip- if CA glue cures without an accelerator, it may leave a smoky residue. If you apply a thin coat of WD-40 and wipe away, this residue will disappear).

The base is modeled with an integrated hangar, kickstand, and standoff feet.

The holes in the logo and base are designed to accept TPU adapters that allow the acrylic rods (with slight manufacturing diameter deviations) to be installed and removed easily, while remaining secure. These adapters can be found here https://www.printables.com/model/618429-tpu-bushing-for-floating-logo-signs

. The inserts are designed with a 2 degree draft angle to lock them in place once installed. I generally print these in clear TPU or a matching color TPU if I have it. I included the F3D file in case you want to change the design to fit any dowel you may have (or print). The dowels I use- https://www.amazon.com/dp/B09SKYYS5X?psc=1&ref=ppx_yo2ov_dt_b_product_details.

If you like this design, think about buying me a coffee (let's be honest- it's going towards filament)- https://www.buymeacoffee.com/thehangardesigns