Project: queen.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 118.75x211.11mm in size

You may print at higher layer heights below the Min Depth of 0.24mm

The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

pla sunluBlack Transmission Distance: 0.3

PLA sunluPurple Transmission Distance: 4.5

PLA BambuLab Basic Yellow Transmission Distance: 6

Pla bambu White Transmission Distance: 6

This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Purple

At layer #12 (1.04mm) swap to Yellow

At layer #16 (1.36mm) swap to White for the rest.