Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm
The Model is 123.14x161mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyTerra Cotton White Transmission Distance: 1.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.84mm) swap to Lava Red
At layer #10 (1.32mm) swap to Savannah Yellow
At layer #14 (1.8mm) swap to Cotton White for the rest.