Penny Flyer

_______________________________________________

About:

Pennies added to the frisbee increase the weight and thus the throwing distance (pennies are cheaper per gram than filament). The frisbee is surprisingly strong even with PLA. We have bounced it off many trees and hit the road hard without breaking or cracking.  There is a version where the pennies are visible on the bottom and a version where they are hidden.

____________________________________________

Steps To Print:

1. Find 7 pennies
2. Pause is set at layer 14 so the pennies can be inserted
3. Have a second filament color ready if you want to change color at the same time
4. When inserting the pennies, feel with your finger to make sure they sit slightly below the top to avoid collision with the print nozzle
5. Finish print and enjoy

____________________________________________

Dimensions + Print Time + Filament Used:

• 9" diameter (229mm)
• Print time: 1hr 54min
• 69 grams of filament
• Total completed weight is 86 grams

____________________________________________

Settings:

• Layer height: 0.28mm
• Walls: 4
• Top shell layers: 4
• Bottom shell layers: 4
• Infill: 20% cubic

_____________________________________________

Extra:

More Cool Prints:mwiller | Published - MakerWorld