I actually do print all of the models I upload and that takes a time and filament.

Visit my Patreon (in bio or http://patreon.com/JustBe3D) if you are interested in *exclusive* FREE and members only models or a commercial license to sell your physical prints of my models.

Can be rescaled just remember not to change the Z axis.

I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.

*IMPORTANT*

I used the 5 color verson for my print. If you want to get the same look as my print you need to use 5 colors. I included the 4 color version for those that want to use it, but it will come out different.

5 Color Version

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Overture Blue Transmission Distance: 1.2
PLA PolyTerra Pastel Ice Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #17 (1.44mm) swap to White
At layer #21 (1.76mm) swap to Blue
At layer #24 (2mm) swap to Pastel Ice for the rest.

4 Color version

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA PolyTerra Pastel Ice Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #17 (1.44mm) swap to White
At layer #21 (1.76mm) swap to Black
At layer #23 (1.92mm) swap to Pastel Ice for the rest.