alexfehr1987

cover

20231022_234709.jpg

20231022_234714.jpg

20231022_224102.jpg

plate_1.png

20231022_234709.webp

plate_1.webp

0.2mm layer, 2 walls, 15% infill

Fredwood6000

DSC04841.webp

[PLA], 2 pcs, 0.2mm layer, 2 walls, 15% infill

diegofesti

IMG_9450.webp

in questo progetto ho stampao in PETG-CF Bambu2 wall4 bottom3 top15% → ok

PETG-CF_0.2mm layer, 2 walls, 15% infill

Urban 3D

IMG_5632[1].webp

This is just a Bambu ABS profile, 2 walls 8% infill. Prints in only 25 minutes, works very well and magnets sit in place perfectly.

Bambu ABS 25 min print 

Budanu

PXL_20241205_203103577.jpg

PXL_20241205_203105475.jpg

PXL_20241205_203109527.MP.jpg

I made this version so that I can print it on the A1 Mini because my X1 is busy :)&nbsp;I used Bambu Lab PLA Royal Purple Sparkle (13700) for it. 0.2 Layer Height Printed without Support &nbsp;Prepare your printer, clean plate for best results, have fun and share :)

Version to print on A1 Mini 0.2mm layer, 2 walls, 15% infill

These small covers help to silence the X1C by covering the openings of the belt tensioners. A small 6x3mm Magnet holds them in place. Also they prevent dust from entering the printer.

X1 Tensioner Covers

PoussinJaune

20240106_021737_242f829f-6932-4a7e-8ff8-c12c83d2ff25.jpg

X1 / P1 Belt Tensioner Covers

3D_HRLV001

1705853577905_ae322afa-d963-434c-97e2-61221bb6e0b9.jpg

1705853577889_f57c5c71-5d3f-4a4e-b8f8-d31ad56944cf.jpg

Képkivágás_9721b516-c62b-4db9-a7c0-cb5b0caa2b1a.jpg

Tensioner Covers  X1C P1S  5x3/5x2/6x3/6x2 magnet

ASIA

Print Profile(5)

Description

Comment & Rating (161)

License

Remixes (3)

Related Models