Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 110.63x177.01mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Sunlu Matte Light Blue Transmission Distance: 2.7
PLA Matte Green Transmission Distance: 3.4
PLA eSUN Matte Mint Green Transmission Distance: 3.3
PLA Spectrum White Transmission Distance: 2.5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Light Blue
At layer #12 (1.04mm) swap to Green
At layer #14 (1.2mm) swap to Mint Green
At layer #18 (1.52mm) swap to White for the rest.
Remember that you dont need an AMS to change color. Just add a pause and replace the filament spool.