Minecraft bee, split in parts to reduce waste:

Body x1 (prints in 2 colors)

Eyes x2 (prints in 2 colors)

Antennae x2 (black)

Legs x7 (6 legs, one stinger, black)

Wings x2 (black)

This is intended to be assembled without glue. The parts should click together tightly. If it's too tight, you can score the body to enlarge the holes, or reprint a slightly smaller offending part. (If it's too loose, you can use glue).

Assembly:

I find it easier to start with the face. The eyes should slide in easily.

The antennae. Place them in position, then press down on the flat side with a flat tool. (Tweezers may be used to hold them in position while you press).

Then insert the stinger, then the legs and wings in any order.

The legs and stinger are slightly thinner on one side. If you have trouble inserting a leg, try turning it around. 

The model has a very small ring to thread a string through. You can use the priming line as a tool for threading the string: fold the priming line, push the fold through the ring, put the string through the fold, pull the folded line holding the string back through the ring.

Enjoy!