May, 25., 2024 V1.0:

first release

----------------------------------------------------------------------------------------------------------------

I proudly present the DUMMONEER DJ-1.

A simplified DJ controller based on the PIONEER DDJ-FLX10, designed to fit with DUMMY13.

This is another model from my series "DUMMY 13 - Micirama" (Diorama by Mici).

You will find the upcoming models for this scene here.

My themed collections: /@Mici/collections

----------------------------------------------------------------------------------------------------------------

Printing:

The provided 3MF file can be used with:

• Orca Slicer/Bambu Studio: Geometries and settings
• Prusa Slicer: Only geometries
• Others: May or may not work

The list of the settings is too long to describe for each individual part, but in principle:

• PLA
• Nozzle: 0.4mm
• Infill: 15%, rectilinear
• Walls: 2
• Wall generator: Arachne (a MUST!)
• Prime tower: Disabled
• Layer height: 0.16/0.08mm, depending on requirements
• Layer height range: For all parts, except the feet
• Colors: Color change by layer
• Supports: No
• Brim: No

Assembly:

• The plates are rotatable but can fall off, so it is better to glue them to the pin
• The other parts all fit snugly and can be assembled without glue. If not, use glue
• Make sure you have removed all residues and the runners accordingly
• The colored buttons can be mixed and matched as desired