Project: Mewtwo7.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180.57x251.91mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.7mm
Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA+ Sunlu Red Transmission Distance: 6
PLA Sunlu Purple Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 7.2
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #12 (1.04mm) swap to Purple
At layer #22 (1.84mm) swap to White for the rest.