Totoro Bookmark - Hueforge
Totoro Bookmark - Hueforge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Sunlu Meta Green Transmission Distance: 10
PLA+ Sunlu Sunny Orange Transmission Distance: 8
PLA Sunlu Meta yellow Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Green
At layer #16 (1.36mm) swap to Sunny Orange
At layer #21 (1.76mm) swap to yellow
At layer #24 (2mm) swap to Ivory White for the rest.
Comment & Rating (3)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
