Hueforge Fallout Punching a Deathclaw !
Hueforge Fallout Punching a Deathclaw !
Print Profile(0)
Description
Hueforge painting I made inspired by this beatiful art by Danbooru for the Fallout expansion of Magic the Gathering.
The print profile's slicing process seems too long to be accepted by MakerWorld so I can only put the raw .stl file.
Important: You can scale X and Y, but not scale Z. You can also try different colors trying to match my TD.
Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x129mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm
Filaments Used:
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA+ Esun Olive Green Transmission Distance: 1.5
PLA BambuLab Basic Beige Transmission Distance: 4.8
PLA Creality Ender White Transmission Distance: 5.6
This print uses 4 unique filaments
Swap Instructions:
Start with Dark Blue
At layer #9 (0.8mm) swap to Olive Green
At layer #11 (0.96mm) swap to Beige
At layer #15 (1.28mm) swap to White for the rest.
Comment & Rating (0)
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
