A simple wall hanger for a Tagelharpa or Talharpa, a type of European bowed lyre, and the bow as well. No more hanging the bow from the tuning pegs! Works with most sizes of household wood screws (I recommend 2cm long at least to pass through the base and well into the wall), with a fluted impression to ensure a flush fit. All surfaces in contact with your instrument are rounded to be gentle on surfaces (these things ain't cheap!). Gusseted arms ensure good strength while providing enough length to allow for ample tuning peg clearance.

This hanger fits instruments with an inner neck gap of up to 8cm and is quite strong when printed with the back against the plate and small supports for the overhangs on the hooks, however you may wish to modify the part to accommodate larger or very heavy tagelharpas, or other types of lyres with tighter string gaps. Don't hesitate to comment here if you need help modifying the part and I will try to help.

Feel free to share and modify following the Attribution-NonCommercial-ShareAlike license, and let me know so I can check out your remixes!