This is my fourth model work, and I have been testing it for a long time.
The original intention of establishing this model is that every time handmade, the desktop is always filled with various parts, which not only affects efficiency but also makes it easy to lose things.
So this model was born.
The box has reserved a space for labeling: the label size is 22mm long and 11mm wide
The front is a small drawer for storing small things, and the back is a pen holder or tool holder that is wide enough to even fit into a phone.
Printing instructions:
Printing does not require support. If you cannot accept the texture of the box handle, you can add some support appropriately.
The box section is recommended to be filled 100%.
The drawer should be filled with at least 20% or more to ensure that the structure is sturdy enough and will not deform.
It is recommended to fill the storage area with about 20% to prevent deformation during the splicing process.
The recommended materials for use are petg and abs. If using pla, try to fill it as high as possible and print according to my recommendation.

------------------------------------------------------------------------------------------------------------------------------------------------------------

这是我第四个模型作品，这个模型我测试了很久。

建立这个模型的初衷是，每次在进行手工制作的时候桌面总是被各种各样的零件摆满，影响效率不说，还容易丢东西。

所以这个模型诞生了。

盒子预留了可以贴标签的位置： 标签大小为 长22mm 、宽11mm

前面是收纳一些小东西的小抽屉，后面是可以当作笔筒使用或者放一些工具，足够的宽，甚至可以塞入一个手机。

打印说明：

打印不需要支撑，如果接受不了盒子把手部分的质感可以适当增加一些支撑。

盒子部分建议百分百填充。

抽屉部分填充最少要20%以上，保证结构足够结实不会变形。

收纳部分建议20%填充左右即可，防止拼接的过程变形。

推荐使用材料为petg 和 abs，如果使用pla的话，尽可能的填充高一些，尽可能的按我推荐的打印