Z Rod Super Lube Super Lube'r
Boost
23
53
8
Print Profile(3)
X1C - 0.16mm layer, 10 walls, 15% infill
Designer
1.6 h
1 plate
A1 - 0.16mm layer, 10 walls, 15% infill
Designer
1.7 h
1 plate
A1 MINI - 0.16mm layer, 10 walls, 15% infill
Designer
1.7 h
1 plate
Open in Bambu Studio
Boost
23
53
8
2
47
33
Released
Description
Simple tool for lubing the Z-Rod with my favorite lube, Super Lube.
Run the bed all the way down clip this on and carefully run it back up while gently squeezing to apply a perfect coat of grease. A little goes a long way!
Remember to clean off the dirty lube before applying new lube.
Threads on to 85 gram tube. Pretty much a lifetime supply.
Printed in solid PETG for long lasting durability, you will only print one of these.
Comment & Rating (8)
All
Print Profile
X1C - 0.16mm layer, 10 walls, 15% infill
printed out great, just waiting for the superlube to arrive. Thanks for sharing
The designer has replied
1
Reply
Looks like it is made out of metal, nice work!
(Edited)1
Reply
Replying to @BattCave
i would take credit for this print quality but its printed in standard settings with some cheap petg without drying. i just clicked print! It was all Bambu lab on this one.
(Edited)1
Reply
Print Profile
X1C - 0.16mm layer, 10 walls, 15% infill
Looks Great, but it does not work with a 12g tube.
Only as described for 85g.
(Edited)
The designer has replied
1
Reply
That is correct, It is specifically made to fit the much larger 85 gram tube. I bet if you measure and downscale it, you can get it to work for that tube too.
(Edited)1
Reply
Print Profile
X1C - 0.16mm layer, 10 walls, 15% infill
Printed without issue in Lake Blue PETG.
1
Reply
Print Profile
X1C - 0.16mm layer, 10 walls, 15% infill
1
Reply
Print Profile
X1C - 0.16mm layer, 10 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
![Super Lube nozzle [No support]](https://makerworld.bblmw.com/makerworld/model/USb9c030cccf792e/design/2024-06-13_5ca0161f0ab3b.jpg?x-oss-process=image/resize,w_400/format,webp)
© 2024 MakerWorld