Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 145.62x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Bambulab Charcoal Transmission Distance: 0.3
PLA BambuLab Basic Cyan Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cyan
At layer #17 (1.44mm) swap to Ivory White
At layer #22 (1.84mm) swap to Yellow for the rest.
Print will take 3h30m, prepare time included (P1S)