Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 200x114.27mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.3mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #6 (0.6mm) swap to Red
At layer #7 (0.68mm) swap to Orange
At layer #13 (1.16mm) swap to Lemon Yellow
At layer #24 (2.04mm) swap to White for the rest.