I actually do print all of the models I upload and that takes a time and filament.

Visit my Patreon (in bio or http://patreon.com/JustBe3D) if you are interested in *exclusive* FREE and members only models or a commercial license to sell your physical prints of my models.

Can be rescaled just remember not to change the Z axis.

I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.

*IMPORTANT*

I used the 5 color verson for my print. If you want to get the gold look you need to use 5 colors. I included the 4 color version as well but it will come out as more of a dark yellow rather than gold.

5 Color gold version

Filaments Used:

PLA Kingroon Black Transmission Distance: 0.4

PLA Overture Space Gray Transmission Distance: 1.4

PLA Overture White Transmission Distance: 4

PLA Dikale Brown Transmission Distance: 1

PLA Elegoo Yellow Transmission Distance: 7.2

Swap Instructions:

Start with Black

At layer #13 (1.12mm) swap to Space Gray

At layer #17 (1.44mm) swap to White

At layer #21 (1.76mm) swap to Brown

At layer #25 (2.08mm) swap to Yellow for the rest.

4 Color dark yellow version

Filaments Used:

PLA Kingroon Black Transmission Distance: 0.4

PLA Overture Space Gray Transmission Distance: 1.4

PLA Overture White Transmission Distance: 4

PLA Elegoo Yellow Transmission Distance: 7.2

Swap Instructions:

Start with Black

At layer #13 (1.12mm) swap to Space Gray

At layer #17 (1.44mm) swap to White

At layer #21 (1.76mm) swap to Black

At layer #25 (2.08mm) swap to Yellow for the rest.