Epic Blackbeard quote.

Do NOT adjust the thickness (Z) in your slicer! The layers will not come out right.

You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller.

These were my settings and colors for my print that you see in the picture.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Nozzle: 0.4

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #12 (1.04mm) swap to White for the rest..