A Japanese Hex Toro style hexagon lantern
215 mm height x 155 Width
200 mm Height Shade
Supports are required to print lantern base frame and top, see 3mf files
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-250-lm-kerzenfoermig-opalweiss-30498748/
The slicer settings for the Base frame and Top:
.20 mm Standard
(All standard settings and speeds, Aligned seam settings)
Filament: Eryone Matte Black
Support Settings
Manual Tree Supports on Base and Top from Base Plate Only
Normal Supports from Base Plate Only
The slicer settings for The Shade:
Filament: Sunlu PLA+ White
No Supports, Seams - Aligned
.20 mm Strength and Generic PLA
Infill % - 100, Rectangular
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Seam Position- Aligned