Bambulab A1 mini Camera relocation
Remixed by
Copyright Claim
Bambulab A1 mini Camera relocation
Remixed by
Boost
114
221
50
Print Profile(1)
0.2mm layer, 2 walls, 10% infill
Designer
1.1 h
1 plate
Boost
114
221
50
14
181
139
Released
Description
I saw the model by designer @mlodybuk to reposition the A1 camera and I liked it for the A1 Mini, since the original perspective is quite bad. However, it is not compatible with this one, so I decided to create this remix to make it compatible with the A1 Mini printer. I also used part of @Henlor's model of the front casing for the X-axis for this printer because it is perfectly designed and fits perfectly.
Thanks @despacho3d for the model of rear cover Bambulab A1 mini Camera relocation back cover and Fake cam rounded to cover original hole
Comment & Rating (50)
All
A1 mini profile. Why?🤔
The designer has replied
0
Reply
Because the mod is for A1 mini 😅😅
0
Reply
I'm asking about the missing layers...😂
0
Reply
...support layers :)...only in the corners
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
modello ottimo e risolve davvero i problemi fastidiosi della camera, propongo di creare anche un piccolo tappo nella parte posteriore per evitare la formazione di polvere!
The designer has replied
1
Reply
In the description you have the links for the back cover and original camera hole cover
(Edited)1
Reply
Replying to @Disttrack3D
ah okk!! non l' avevo notato! grazie!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Hardest part was getting the camera out, bet I messed with that for 30 minutes lol. Love the better view, nice job! Though it is such a better view I will actually be using camera slide as it show more of my office now 😉
Glad I found your back plate, fits perfectly 👌
The designer has replied
2
Reply
Thanks!!
0
Reply
great idea. what about a plug to fill the void where it was mounted. not real attractive leaving that hole open and also allows debris to enter
just a thought
The designer has replied
3
Reply
I'll try to make a piece to cover the hole, thanks for the suggestion.
1
Reply
is this also on the back of the camera in the design as this is also open 🤔
Or i missed something?
0
Reply
I was referring to the void space where the camera was originally mounted is now just a hole or is that what the cap is for and
just print 2 of them ?
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
Perfecto!!! Se ve mucho mejor ahora.
The designer has replied
1
Reply
Muchas gracias!!
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
😍
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
top
0
Reply
Boosted
Well, i had to pull a bit of the cable out to plug it in the cam. Now i can plug it in but i don't can see anything in the app and can't turn the ligh on...
The designer has replied
0
Reply
Check again that the camera connector is securely attached.
0
Reply
Boosted
Replying to @Disttrack3D
I'm stupid, somehow i managed to destroy the connector pins on the camera...
0
Reply
Replying to @faluethi108
oh, sorry to hear that
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
1
Reply
Haven't tested or printed. But will this mess with the calibration and monitoring? I noticed the camera realizes when there is extra filament on the nozzle and wipes it away mid print. Since you cannot see the nozzle in the after, does it affect it?
The designer has replied
0
Reply
It's not actually the camera that detects those filament remnants on the nozzle; it's the pressure sensor itself that touches the bed to check that everything is fine. Therefore, adding this camera mod would not affect that function or any other function at all.
1
Reply
awesome. thank you for clearing that up. definitely will be investing in this then.
0
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld