Search models, users, collections, and posts
Turtle Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
6.6 h
1 plate
Open in Bambu Studio
Boost
54
129
12
7
79
42
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
If changing size . . . only change X and Y, not Z.
The Model is 230.99x153.9mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Blue Gray
At layer #17 (1.44mm) swap to Gray
At layer #26 (2.16mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (12)