This is a hueforge 100x100mm print that i designed and worked on hueforge. i have been buying magnets from amazon to put these on things like the fridge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x100mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.2mm and the Actual Depth is 0.4mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyLite Red Transmission Distance: 1.5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #5 (0.48mm) swap to Blue
At layer #7 (0.64mm) swap to Jade White
At layer #11 (0.96mm) swap to Charcoal Black
At layer #12 (1.04mm) swap to Red
At layer #15 (1.28mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.