SUPPORTS ARE REQUIRED FOR THIS PRINT.

Please ensure you leave supports turned on, or the top “lip” of the frame will not print properly.

This frame is for making signs; you can insert cards or paper from the top.

The sides are closed off and there is a lip on the top and bottom of the frame to ensure your insert doesn't come out by accident.

At the provided scale in the 3mf, it fits A5 paper or card with a maximum insert thickness of 2mm.

Ensure your insert has a border/trim of at least 7mm around it so none of your text/art gets hidden by the frame lip.

You can use “Make My Sign” to make a card that can be inserted into this frame stand like my example. I have included a sign example for the correct scale/thickness that fits the stand.

Use the below dimensions to create a sign from scratch. (https://makerworld.com/makerlab/MakeMySign)

Thickness: 1mm to 1.9mm (no thicker than 2mm or it won't fit!)

Height: 210mm

Width: 148.5mm

Border Offset: 7mm (ensure all text/artwork you want visible is inside the border.)

Please do not sell prints of this frame stand.

RAW files such as STLs are available on my Patreon: https://www.patreon.com/thomastedwards