The picture was drawn by Zell and edited by me in with hueforge to a 3d picture

I do not know if you get the picture in color if not this is the description what you have to set and get the fox in color:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 134.29x200.29mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

1. PLA Black Transmission Distance: 0.3
2. PLA Brown Transmission Distance: 1.5
3. PLA Basic Brown Transmission Distance: 2
4. PLA White Transmission Distance: 5
5. PLA Highlight Yellow Transmission Distance: 6
6. PLA White Transmission Distance: 6
7. This print uses 6 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Brown
At layer #15 (1.28mm) swap to Brown
At layer #17 (1.44mm) swap to White
At layer #18 (1.52mm) swap to Highlight Yellow
At layer #21 (1.76mm) swap to White for the rest.