Wall Clock / Wanduhr für Uhrenkomponenten-Kit 011

Wall Clock / Wanduhr für Uhrenkomponenten-Kit 011

Boost
90
141
11
This model is created by Make My Sign
Make Your Model

Print Profile(6)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.8 h
3 plates
5.0(5)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.6 h
3 plates
5.0(3)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
4.1 h
4 plates

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.5 h
4 plates
5.0(2)
Click to see more

Boost
90
141
11
5
135
45
Released

Description

I once tried to make a clock face for the clock component kit 011 (including hands and wall mount) maybe someone will enjoy reprinting it.

 

I used the radio clock movement from Amazon, which is dimensionally identical to the Kit 011 from Bambulab.

https://www.amazon.de/dp/B00TOBU9B6?ref=ppx_yo2ov_dt_b_product_details&th=1

 

If you want to use the dial as an STL file for printing, you must make sure that you enlarge the hole in the middle to 8mm in the slicer, as this has changed accordingly due to the scaling. For everyone who uses the 3MF…… it can probably be scaled without any problems 😉

 

I added a new print profile with a set of new clock hands. The second hand is very difficult to print. I recommend using the print profile for this.

 

If anyone needs different sizes for the hands, please feel free to contact me. I will then adjust them accordingly and set them up as a new profile. (other clock movements have different diameters of the hand holder)

 

 

 

 

Ich habe mich mal daran versucht eine Ziffernblatt für das Uhrenkomponenten-Kit 011 zu basteln (incl. Zeiger und Wandhalterung) evtl. findet jemand Freude daran es nachzudrucken.

 

ich hab dazu das Funk-Uhrwerk von Amazon verwendet, welchens maßlich identisch zu dem Kit 011 von Bambulab ist.

https://www.amazon.de/dp/B00TOBU9B6?ref=ppx_yo2ov_dt_b_product_details&th=1

 

Wer das Ziffernblatt als STL datei für den Druck verwenden möchte muss beachten, dass er im Slicer das Loch in der mitte auf 8mm vergrößert, da sich dieses durch die Scalierung entsprechend verändert hat. Für alle die die 3MF verwenden…… da kann vermutlich problemlos scaliert werden 😉

 

Ich habe ein neues Druckprofil mit einem Satz neuer Uhrzeiger hinzugefügt. Der Sekundenzeiger ist sehr schwierig zu drucken. Ich empfehle das Druckprofil dafür zu verwenden.

 

Falls jemand andere größen für die Zeiger benötigt, kann sich gerne melden, ich werde diese dann entsprechend anpassen, und als neues Profil einstellen. (andere Uhrwerke haben andere durchmesser der Zeigeraufnahme)

 

 

hier ein Bild der neuen Zeiger:

Folgende Modelle sind hier zu finden:

Bill of Materials

Purchase from Bambu Store

Comment & Rating (11)

Please fill in your opinion
(0/5000)

Print Profile
clock hands 2
very nice
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good 👍
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Love the modern minimalist design. I used clock hands that came with the generic clock kit I purchased for this project. Simple to print and fulfills my need. Thanks!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Good print, no problems with PETG in black and white.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Scaled it down to about 130mm, worked great with the negative body in the center
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Ottimo lavoro bello e facile da stampare
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply