Memorial Day Lithophane - Vietnam War Memorial

Memorial Day Lithophane - Vietnam War Memorial

Boost
2
3
0

Print Profile(2)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

Wall White Vertical A1 Mini
Wall White Vertical A1 Mini
Designer
6.4 h
1 plate

Wall White Vertical XPA
Wall White Vertical XPA
Designer
5.8 h
1 plate

Boost
2
3
0
0
4
1
Released

Description

Memorial Day (US) Lithophane 144mm x 108mm (for Bambu light frame). Two versions are provided, color (printed flat), and monochrome for those without AMS or non-Bambu printers (printed vertically). A specially designed vertical printing frame is provided. All stls are provided in the download section. Please note I am unable to load my color profiles due to timing out in the cloud slicer. Please use the .3MF files in the download section.

 

See my other lithophane collections:

4x3 Lithophanes

Spherical Lithophanes

Hexagonal Lithophanes

Alternative Light Frame

 

Printing Instructions:

Color - Unfortunately, I am unable to upload my color profile due to cloud slicing timeout. Please download the .3MF from the downloads section. To plate it yourself, please extract the stl files located in the zip archive in the “Color - Print Flat” folder. Drag all the lithophane files onto the plate and accept them as an assembly. Assign the appropriate colors on the object screen. It should be printed printed with Bambu CMYK (or equivalent) filaments at .07mm layer height, 99% rectilinear infill and .25mm line width with .4mm nozzle.

White Vertical - Use my profiles for my preferred settings. If you prefer to plate it yourself, please follow these instructions;

The frame and the lithophane are not assembled into one object and have different print settings. I have set the lithophane to print at .12mm and the frame to print at .24mm. This means the frame will print every 2 layers of the lithophane. Global project setting - .24mm layer height, 5% rectilinear infill.

 

To plate the frame and the lithophane, drag them both onto the plate but do not accept them as an assembly. For bed slingers (A1 and Mini), set the lithophane and the frame parallel to the y-axis. Rotate the frame 90 degrees, if necessary.

Right click and center each component on the plate.

Once centered, select the lithophane and go to the object screen and set the layer height to .12mm and the wall loops to 10. This will maximize the quality of the lithophane while reducing the print time and the weight of the frame.

The frame should be easy to remove by flexing it.

 

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more