Changed infill to cross hatch since grid infill is bad. Also changed nozzle to 0.6 and mode to extra draft. Printed very nicely using Nanocaddo PLA 

Johnny_Bit

85% with minimum support - 0.28mm layer, 2 walls, 15% infill

Wieger

casvg5

0.2mm layer, 2 walls, 15% infill

Printed super well, love the minimal supports. Girlfriend loved it!

Sunny

printed the model in a glitter gold black pla and it looks great! I kept it full of water overnight to check for leaks and there were none.

Procerand

Didi you download recently? As it was highlighted very early on after I uploaded  that there was a first layer issue and I fixed right away and replaced the file.

Enique3d

AuntKimmy

I double checked the model and was fine my end had no issues slicing.

Had several issues with the first layer. The model is split in halves and the left half layers were difficult to get to stick to the mat because of their spacing. With some babysitting and speed changes I was finally able to get a full print.

nussi1693

Which Filaments u used for the lighter one?

DJE_RICH

First real print I made for my wife. Used a pink/gold silk filament. She's convinced the printer is legit now.

Llama Loot 3D

ottomann

cover

IMG_5423_5aa0daf5-fa5c-4ef7-8ef3-b4ab7a90a55c.jpg

IMG_5422_7a92e231-4934-4418-8bb7-b537e936b370.jpg

IMG_5424_dfff28aa-751a-4570-a71a-ad115f0e23e5.jpg

IMG_5426_bedc4728-016e-470b-be93-296db27087d7.jpg

IMG_5427_557e0fda-bf7b-45aa-83f4-5770f5e2692c.jpg

IMG_5423_5aa0daf5-fa5c-4ef7-8ef3-b4ab7a90a55c.webp

plate_1.png

0.2mm layer, 2 walls, 15% infill&nbsp;you can play around with the settings, nothing speacial rfequired..you will need supports for some areas.

photo1716889434_66bc2aa7-1329-4e17-8b07-6c5be95379f9.webp

plate_1.webp

The only support that is needed in this profile is in the left eye of the skull, see in the picture it's kind of nice keeping if, if you ask me.Other than that I have fixed the bottom layer to meet the plate evenly, in addition I rescaled it to 85% and reduced the print speed for the initial of the print. if you enjoy it I'll be happy for 5 stars ;)

1719335606001_beb4aa92-448d-46a7-9235-00cb210a4c3e.webp

1719335606009_b08d3511-3ffd-44ed-a9ff-9780d8b95a50.webp

1719335606016_ebead751-45c1-4ad6-a24e-4d8a302cabf8.webp

1719335606025_8efb0d14-5ecb-4885-8d5c-35e93e5b2544.webp

<ul><li>0.6 mm nozzle</li><li>0.42 mm layer height in ExtraDraft mode</li><li>infill changed to 10% cross hatch (less chance of failure)</li><li>support only the critical region on the left eye</li></ul>Extra thick layer lines give it even more “low poly” look IMHO :)

Print Profile(3)

Description

Comment & Rating (44)

License

Related Models

Low-Poly Snorlax

Low-Poly Unicorn

Low Poly Espeon Pokemon

Low Poly Monkey

Low poly skull planter