Aquaman Logo Hueforge Desk/Wall Decor

Printed on Bambu Lab A1

Actual Colors Used:

PLA Elegoo Black

PLA Elegoo Blue

PLA Elegoo Sky Blue

PLA Elegoo White

Rapid PLA+ Elegoo Yellow

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA Kexcelled Sky Blue Transmission Distance: 2.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6

This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #11 (0.96mm) swap to Sky Blue
At layer #13 (1.12mm) swap to Jade White
At layer #22 (1.84mm) swap to Yellow for the rest.