Aquaman Logo Hueforge Desk/Wall Decor
Printed on Bambu Lab A1
Actual Colors Used:
PLA Elegoo Black
PLA Elegoo Blue
PLA Elegoo Sky Blue
PLA Elegoo White
Rapid PLA+ Elegoo Yellow
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA Kexcelled Sky Blue Transmission Distance: 2.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #11 (0.96mm) swap to Sky Blue
At layer #13 (1.12mm) swap to Jade White
At layer #22 (1.84mm) swap to Yellow for the rest.