design element

cover

IMG_0205_6c44a53e-aa77-4746-b188-924792b078f0.jpg

IMG_0206_dc56031a-c94d-4712-9f48-9061d1e22e02.jpg

IMG_0207_cb6d57c5-2005-41d1-95f9-2daf6deba71d.jpg

sticky back hook small

plate_1.png

screw bracket hook small

plate_2.png

plate_1.webp

plate_2.webp

IMG_0207_bd13ce43-c718-489c-8782-18e3915b34a3.webp

<ul><li>Supports required.</li><li>Strong print profile recommended.</li></ul>

small hooks

screw brack hook large

sticky back hook large

IMG_0207_8dd97c15-cf37-4b01-9ace-cf3e40ceb5ad.webp

<ul><li>Supports required.</li><li>Strong print profile recomended.</li></ul>

large hooks

screw brack hook medium

sticky back hook medium

IMG_0207_cf7444f4-ea13-450e-b42c-f8aed78931af.webp

<ul><li>Supports required</li><li>Strong print profile recomended &nbsp;</li></ul>

medium hooks 

N1MIE

IMG_2546.jpeg

As per my review, I wanted to modify the model to add negative space for magnets. I'm not sure if that will come through on the print model but I hope so. I also used finer settings to try and get nice smooth curves and manually added tree supports for the hook itself. There are also tree supports for the tops of the magnet holes, I use a fine tip screwdriver or fine tip needlenosed pliers to remove them.

0.12mm layer, 5 walls, 30% infill

There are three sizes and two types of hooks designed. There is a screwed back, hidden bracket hook and a flat hook designed to be either glued or used with double sided tape to stick to a flat surface.&nbsp;<ul><li>The small hooks are 38mm tall and 20mm wide</li><li>The medium hooks are 57mm tall and 30mm wide</li><li>The large hooks are 76mm tall and 40mm wide</li></ul>

strong hooks 

ASIA

Print Profile(4)

Description

Comment & Rating (15)

License

Related Models