Search models, users, collections, and posts
Wolverine - Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
3.5 h
1 plate
Open in Bambu Studio
Boost
60
128
3
2
26
12
Released
Description
Enjoying this project? Consider supporting me on Ko-fi!
>>> https://ko-fi.com/boardgamerdimontagna <<<
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Coffee Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA+ Esun Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Coffee
At layer #18 (1.52mm) swap to Ivory White
At layer #19 (1.6mm) swap to Yellow
At layer #23 (1.92mm) swap to Ivory White for the rest.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (3)