Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Coffee Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA+ Esun Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Coffee
At layer #18 (1.52mm) swap to Ivory White
At layer #19 (1.6mm) swap to Yellow
At layer #23 (1.92mm) swap to Ivory White for the rest.