Some cute kittens to help keep your place.

Measures 150mm x 50mm (approx. 6" x 2").

The included 3MF file will have the colour swaps already set up. Alternatively, use the STL and set up your own filament swaps and settings as per the instructions below.

If you need to resize this print, change only X and Y dimensions. Altering the Z height will mess up the layer colour swaps.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 50x150mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 1.5mm and the Actual Depth is 1.4mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 2.7
PLA BambuLab Basic Brown Transmission Distance: 1.2
PLA BambuLab Basic Jade White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.44mm) swap to Blue Gray
At layer #14 (0.68mm) swap to Brown
At layer #18 (0.84mm) swap to Jade White for the rest.