Umbreon looking up to the moon ( Hueforge )

Copyright Claim

Umbreon looking up to the moon ( Hueforge )

Boost
12
19
1

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.08mm layer, 2 walls, 100% infill
0.08mm layer, 2 walls, 100% infill
Designer
3.8 h
1 plate
5.0(1)

Boost
12
19
1
0
11
4
Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 142.2x240.01mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

 

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

 

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Blue

At layer #12 (1.04mm) swap to Yellow

At layer #18 (1.52mm) swap to Jade White for the rest.

Comment & Rating (1)

Please fill in your opinion
(0/5000)

Print Profile
0.08mm layer, 2 walls, 100% infill
0
Reply
No more