TO MAKE THE 5 COLORS YOU JUST NEED WHEN THE BLACK LAYERS FINISH. REPLACE THE BLACK COIL AND INSERT THE BROWN COIL INTO THE AMS INSTEAD.

HUEFORGE BENGAL CAT
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6

PLA PolyTerra Sunrise Orange Transmission Distance: 2

PLA PolyLite Pro Light Yellow Transmission Distance: 3

PLA Kexcelled White Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8

Swap Instructions: Start with Black

At layer #4 (0.4mm) swap to Sunrise Orange
At layer #5 (0.48mm) swap to Light Yellow
At layer #6 (0.56mm) swap to White
At layer #12 (1.04mm) swap to Beige for the rest.