Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm

The Model is 100x157.98mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 3mm and the Actual Depth is 2.7mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA Sunlu Meta red Transmission Distance: 7

PLA+ Sunlu Orange Transmission Distance: 5

PLA+ Sunlu Pure Yellow Transmission Distance: 5

PLA+ Sunlu White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.8mm) swap to red

At layer #11 (1.4mm) swap to Orange

At layer #12 (1.52mm) swap to Pure Yellow

At layer #18 (2.24mm) swap to White for the rest.