One Piece 200 or 150mm Hue Force
Boost
10
15
1
Print Profile(4)
(Profile 20mm) 0.12mm layer, 2 walls, 15% infill
Designer
1.2 h
1 plate
(Profile 150mm) 0.12mm layer, 2 walls, 15% infill
Designer
53 min
1 plate
(Profile 200mm no color, no abs) 0.12mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
(Profile 150mm no color, no abs) 0.12mm layer, 2 walls, 15% infill
Designer
44 min
1 plate
Boost
10
15
1
0
40
3
Released
Description
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm
Filaments Used:
PLA Black Transmission Distance: 0.5
PLA Red Transmission Distance: 4.5
PLA BambuLab Basic Pink Transmission Distance: 8
PLA PolyLite Orange Transmission Distance: 11
PLA Kexcelled Yellow Transmission Distance: 6.8
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #5 (0.68mm) swap to Red
At layer #7 (0.92mm) swap to Pink
At layer #9 (1.16mm) swap to Orange
At layer #12 (1.52mm) swap to Yellow for the rest
Comment & Rating (1)
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld