Torii gate Japan

Torii gate Japan

Boost
5
6
0

Print Profile(1)

All
A1

0.08mm layer, 2 walls, 100% infill
0.08mm layer, 2 walls, 100% infill
Designer
2.8 h
1 plate

Boost
5
6
0
0
3
1
Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 120x160mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PETG JAYO White Transmission Distance: 6
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Charcoal Black
At layer #10 (0.88mm) swap to White
At layer #16 (1.36mm) swap to Silver
At layer #21 (1.76mm) swap to Scarlet Red for the rest.

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more