OpenRC Truggy 1/10 by NiKO

Remixed by
Copyright Claim

OpenRC Truggy 1/10 by NiKO

Remixed by
Boost
11
20
0

Print Profile(0)


Add the first print profile to earn points

Boost
11
20
0
2
13
0
Released

Description

Summary

Upgrade - 2024-03-01

Diff Housing.STL - the lever mounting gap has been increased

Upgrade - 2022-02-12

Reinforced load-bearing elements.
Wishbone Front for HSP188015.stl
Wishbone Rear for HSP188015.stl
Turnbuckle Front.stl
Turnbuckle Rear.stl
Front_C-Hub.stl
Rear_C-Hub.stl

Solidworks files - https://grabcad.com/library/openrc-by-niko-1

Upgrade - 2019-08-26

Increased clearance to 0.5mm in support for levers. This will improve the support compartment for PET-G:
Wishbone Rear for HSP188015_Right.STL
Wishbone Rear for HSP188015.STL
Wishbone Front for HSP188015.STL
Wishbone Front for HSP188015_Right.STL

Upgrade - 2019-06-22

Front_C-Hub.STL - expanded the central cutout (100% Fill PLA)
Front_Stearing_Hub_v1.1.STL - increased thickness + design (100% Fill ABS or PETG)

News - 2018-11-20

Added it .STEP file https://www.thingiverse.com/download:5634213

This version of the Traggi is designed for those who want a more complex and reliable design. I recommend assembling it after assembling the original version https://www.thingiverse.com/thing:42198

OpenRC Truggy by NiKO includes many improvements to increase reliability and durability. Among them:

Increased space for >3S 5000mAh and more batteries
Battery fasteners with Velcro
The central differential uses a combination of metal and plastic parts mod 1.
The front and rear differential housings are made of HSP metal.
The C-HUB has a more convenient snap-on design
The fists are made for cheap steel CVD HSP drives with large and small bearings
The original shape of the levers
The steering unit has been updated
Increased suspension travel
Ackerman angles are calculated
and a lot of little things.

Watch the full assembly of the model in the video https://www.youtube.com/watch?v=qOXqeuO0pfg

Composite nodes:

Central differential

Запчасти

  • Screws M3x12 - 30 pcs (upper and lower deck fasteners)
  • Washers DIN 9021 M5 - 4 pcs
  • M3 nuts - 24 pcs (it is better to take 18 simple and 6 with nylon seals)
  • Screws M2.5x10 - 8 pcs (for Front_C-Hub and Rear_C-Hub)
  • Screws M2x6 - 4 pcs (for fixing studs M3x60)
  • Screws M3x20 - 4pcs (for attaching amortizers to butterflies)
  • Screws M3x16 - 4pcs (for attaching shock absorbers to levers)
  • Studs M2x32 - 4pcs (I made from nails)

 

Studs M3x60 - 4pcs (I made from nails)

Differential drive HSP 02030 (2 pcs)
https://egorniko.ru/r/C

Differential HSP 02024 (3 pcs) one went to the central
https://egorniko.ru/r/D

Bones (2pcs) 89.5mm
https://egorniko.ru/r/B 89.5мм

Cups (2 pcs)
https://egorniko.ru/r/E

20kg servo (I really liked it)
https://egorniko.ru/r/F

Ball bearings
https://egorniko.ru/r/Q

CVD HSP 108015
https://egorniko.ru/r/G

Bearings

ABEC-3 5x10x4 mm, 8pcs
https://egorniko.ru/r/I (It is better to take these in reserve, because they are expendable)

ABEC-3 6x12x4 mm, 4pcs
https://egorniko.ru/r/J

ABEC-3 10x15x4 mm, 8 pcs
https://egorniko.ru/r/K

Shock absorbers 110mm (took the same size on the front and back)
https://egorniko.ru/r/L (Traxxas Slash 5807)
https://egorniko.ru/r/M (HSP 108004)

The wheels are about 12 cm in diameter
https://egorniko.ru/r/N

1M pinions (5 mm shaft 11T 12T 13t 14t 15t) Small diameter due to large wheels
https://egorniko.ru/r/O

  • GoolRC S3660 3300-3800KV motor (5mm shaft) + Regulator 3-4S 80 Amps (do not take 2-3S, overheats)
    https://egorniko.ru/r/P
    I have a 3300KV motor (i.e. with a margin of up to 4S). If you will only drive 3S, then it may be worth taking 3800KV.

Print Settings

Printer: 

Delta

Supports: 

No

Resolution: 

0.25mm

Infill: 

90%


 

Notes: 

Everything is printed without support.
I recommend printing like mine: red is PLA, white is ABS
Wishbone - 0.25 mm
Front_Stearing_Hub.STL - 0.25 mm
Rear_Hub.STL - 0.25 mm

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more