Holder for stick when you need to cook something on campfire during camping or fishing. Very simple and reliable principle. Tested on several camping and fishing sessions with very positive feedback from friends - many of them asked me to print it for them ;-) .

Usage description

• Fixation

By default, the holder is fixed with the shaft and the stand. To fix the stand, you can find a big piece of wood or stone around. This is, in my opinion, the easiest and most reliable way.

But if you have limited space or are restricted on carrying weight, you can exclude shaft and(or) stand.

If the angle is too low or too high, you can use a stand spacer to change the range of the angle. But in my experience, I never need this.

• Control

Horizontal alignment is controlled by turning the holder around and securing it with a screw. But you will mostly do vertical alignment controlled by the top screw.

Printing

• Screws must be printed with 0.12 layer height - already implemented in print profile and 3mf file
• On the screw attachment part are 2 pieces of support, make sure you remove them