Print Profile(1)
Description
Fox HueForge
This beautiful fox, staring right at the viewer through a hole at a brick wall, is one many HueForge artworks to come!
This model uses “HueForge” technic of alternating layers of filaments to create different hues and color mixes with only 4 colors!
Printing Instruchtions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA Filamentum Dark Blue Sprakles
PLA BambuLab Basic Orange
PLA Generic Yellow
PLA Ender White
Swap Instructions:
Start with Dark Blue
At layer #8 (0.72mm) swap to Orange
At layer #13 (1.12mm) swap to Yellow
At layer #17 (1.44mm) swap to White for the rest.
At the Bambu slicer, Just click the plus button on the slider thats on the right of the preview, and click change color according to these sawp intructions.
I hope you like this model!
please leave a like if you did!
HAPPY PRINTING!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)