Samsung T7 Touch Drive Hub

Copyright Claim

Samsung T7 Touch Drive Hub

Boost
1
0
0

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.9 h
1 plate

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
7.3 h
1 plate

Boost
1
0
0
0
1
0
Released

Description

This is my take on a SSD Drive and Storage solution. There are may out there and I used the Original Samsung cable in a clam shell to protect the cable end.

 

The cable is put in the clam shell and inserted in the back of the drive bay. It should fit flush and snug on the back of the bay. If you need to replace or remove the cable, the drive bay has enough room inside the drive bay to be able to remove the clam shell by pushing it back out.

 

I set this on a smooth PEI build plate on its side and it prints great with PLA. I also tried it with a Textured PEI plate with ABS.  I set this on its side to minimize bridging length.  

 

Please comment below and let me know what you think of this model and any suggestions on how to improve it. This is my first Model that I've created. And just got my first 3D Printer 2 weeks prior.

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more