This profile allows you to max out you printer, This profile ranges from, baseline, all the way up to max, I recommend using the quality profile for reducing print time while keeping it looking pretty, (find these profiles in the raw model files) for Max, you need orca slicer, you also need a Cht Hotend due to flow rate not being enough while stock, or use an OBXIDIAN Hotend. This profile also increases your stepper amperage, giving more torque, it is not known to have any negative side effects, but your steppers will run hotter, ex: 40c, but most steppers are fine until 100c. I have been using these profiles for several months. If you have any questions, feel free to ask me down below.