Chamber Heater for Bambu Lab P1S, X1, X1C
This heater is great to print complicated materials that need as stable as possible temperature in a few materials (ABS, ASA, Nylon, PC, etc.) to get a perfect layer addiction and avoid the cracking and warping.
I hope like this mod and Happy printing!!!
Heater and fan (300W-24V)
Temperature Controller Thermostat (10A-24V)
Power Supply Adapter (15A-24V=360W) Note: in amazon the price when I bought it was the same or less than AliExpress
https://www.amazon.com/dp/B06XK2ZNKC?ref=ppx_yo2ov_dt_b_product_details&th=1
NOTE: can be use the sensor that brings the temperature control but I better recommend buying another longer 2M-3M
Thermistor sensor 2-3m for a better cable management
I used M3 6 or 8mm screws and Brass Heat to insert in the model printed
Brass Heat
M3 Screws 6 or 8mm
NOTE: I’m not winning anything with this article so can be purchase in another website or similar articles.
My spent:
M3 screw 8mm 50pcs=$1.35
Brass heat insert nut=$7.49
Sensor 2M=$1.1
Inlet module plug with fuse=$1.31
Jack Male Plug Metal Connector = $1.77
Jack female plug metal connector= $3.77
Digital thermostat controller 24v=$3.57
300w Heater 24v=$14.72
360w 24v-15A power supply=23.99
1kg ABS=$16.99(I spent more on the design mistakes, but to print everything only need like 500g)
Total=$59.07 + $16.99(ABS The price may vary depending on the brand purchased.)= $76.06