HI EVERYBODY !!!

connect the main pin to the drill driver.

create a loop on the line to be pulled out and attach it to the central pin in the upper part of the main body.
put the magnetic cover on so that it cannot be removed.
join the drill with the pin and start turning it.

pay attention when you see it coming towards the end, slowing down the screwdriver to avoid the violence causing the reel to fly away.
once finished, remove the lid, remove the old fishing line, if you like, cut it with scissors so it doesn't come out of the waste bin by itself.

at least six magnets measuring 6x2 are needed (3 above and 3 below are already sufficient)
pay attention to the correct polarity.
I recommend using a drop of glue

I hope you like MY project...

CEERONE_SAK

rate me !!!