Tick removal tool - Zeckenhaken

Copyright Claim

Tick removal tool - Zeckenhaken

Boost
8
9
9

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.12mm layer, 3 walls, 100% infill
0.12mm layer, 3 walls, 100% infill
Designer
43 min
1 plate
4.6(5)

Boost
8
9
9
3
25
26
Released

Description

Summer is coming…. and tick's also…..

 

Filaments that i used:

  1. Bambu PLA Basic Red

Print Settings:

  • BambuLab X1C with AMS
  • Resolution: 0.12 High Quality
  • Wall: 3 lines
  • Infill: 100%
  • Temperature: 230° C for filament
  • Temperature: 60° C Heatbed
  • Printplate: BambuLab Textured
  • Support: No - only brim

Comment & Rating (9)

Please fill in your opinion
(0/5000)

Print Profile
0.12mm layer, 3 walls, 100% infill
Nice little helper. Was already able to remove a tick from our dog with the medium size. The small one broke right after getting them off the printplate. I will try a print with PETG.
The designer has replied
1
Reply
on which Plate and which temperature did you Print it? which filament Vendor did you use? With my red bambulab Basic Pla on textured Plate / 55 celsius i don’t have this problem and use the small one also to remove a tick with it. but i‘m happy that you was able a tick from your dog 🥰
0
Reply
Replying to @Tschonke :
I took Bambu Basic PLA white and also textured plate at 55°. Maybe it was the color or i forgot to turn off the aux fan what i usually do. Anyway, will give it a try with another color and PETG and see how it will turn out. 🥰
0
Reply
Replying to @Rayman :
yes please Test with petg i do a new Testprint with multiples …. and you‘re right One of the small ones bricks during brim removal i will redesign the small one with the grip from middle sized to increase the stability. Thank you for your Feedback and sorry for the issue
0
Reply
Print Profile
0.12mm layer, 3 walls, 100% infill
ausprobiert .. klappt gut
The designer has replied
0
Reply
ok - danke. Aber warum dann nur eine mittelmäßige Bewertung? hat etwas nicht gepasst?
0
Reply
Print Profile
0.12mm layer, 3 walls, 100% infill
1
Reply
Print Profile
0.12mm layer, 3 walls, 100% infill
1
Reply
Print Profile
0.12mm layer, 3 walls, 100% infill
1
Reply
No more