Ultimate Portable Pole Rest by WimV

WimV

Hobby & DIY>Sport & Outdoors

In Contest

Fishing Gear

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

Designer

1.3 h

1 plate

4.0(6)

Boost

118

Released

Description

A handy companion for lightweight fishing.

Easy to carry in your jacket pocket, trouser pocket or small fishing tackle box.

Somehow video's are not properly displayed. Link to the original video (with sound, you can hear the clicking of the sliders): https://youtu.be/-HubPGrIHHA

Completely Print in Place.

After printing you can easily fold them and lock them using the built-in sliders.

First fold the point that goes into the ground and then the V-holder. The V-holder keeps the tip protected and in place after folding.

If after printing it seems that the slides are difficult to release, carefully pry them loose by placing a small screwdriver in the narrow slit at the end of the slide.

Comment & Rating (14)

@Trev729

super cool print! just can’t get the parts that are supposed to slide to lock it in place free

The designer has replied

@wim_v

Hi Trev, Did you try to pry them loose as I described in the text? Put a (small) screwdriver or knife in de slit (below your thumb on the photo).. The bottom of the sliders are probably a little bit fused by the bridging above. I have forseen a space of 2 missing layers as free space, but the printlines sag a little and slightly fuse to the sliders. You have to break them loose. Hope this helps.

@ethan.kuyunzhi

Boosted

have boosted twice

The designer has replied

@wim_v

Many thanks 👍

@ethan.kuyunzhi

Boosted

this is the best for exploring new spots for carp! thanks man! you will win bro!!!

@user_4184012307

Print Profile

0.2mm layer, 3 walls, 15% infill

had a little trouble with one lock fusing, but overall great print

@SplittingAt0ms

Print Profile

0.2mm layer, 3 walls, 15% infill

great design. can’t wait to try it out

@joyrajjder

Boosted

Very clever design and printed great

@cabunnda

Boosted

so good!

@kyleehlers93

Print Profile

0.2mm layer, 3 walls, 15% infill

Support Issue

The designer has replied

@wim_v

Hello Kyleehlers, You rated the printprofile with 1 star with remark support issue. But there is no support needed at all! What do you mean? Maybe I can help with it?

@greg6021

Print Profile

0.2mm layer, 3 walls, 15% infill

@meyerbreck

Print Profile

0.2mm layer, 3 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.