Extension Cord Cable Reel out of Filament spool
Copyright Claim
Extension Cord Cable Reel out of Filament spool
Boost
27
50
10
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
5.6 h
1 plate
Boost
27
50
10
0
37
8
Released
Description
Cable reel out of an old Sunlu spool, max capacity is about 15m.
BOM (Affiliate links)
- 1xSunlu filament spool, inner diameter 72,5mm aliExpress amazon.de
- 2x608 bearings aliExpress amazon.de
- 1xM8x50 bolt
- 1xM8 washer
- 1xM8 captive Nut
- 6xM4 inserts aliExpress amazon.de
- 4xM4x15 countersunk screws aliExpress amazon.de
- 1xM4 wing or knob screw for the brake (optional)
- 1xM3 insert aliExpress amazon.de
- 1xM3 washer
- 1xM3x15 screw
- 1xsocket amazon.de
- 1xcable tie
two choices for the socket:
- PCE socket (untested part, designed after datasheet)
https://www.hornbach.de/p/cee-schutzkontaktsteckdose-pce-16a-ip54-3-polig-blau/5196491/
you will also need 4xM4 screws and nuts for this one - unknown round socket out of an quite old orange metal power strip
(the one on the pictures)
You can print everything without support, except the base.
The base is work in progress, I think it uses to much filament to print, but it needs to be quite sturdy.
Comment & Rating (10)
All
I am looking for a similar solution but for UTP cable.
Instead of a socket, a plate in which to attach a keystone would be a godsend for me.
If you could make an adjustment for this in your design I would be very grateful.
When I have some more time I can also try if I can design something and possibly give your design a remix.
The designer has replied
0
Reply
Hey, that's a great idea. Do you have some dimensions for the keystone hole or maybe a link? Should be quite easy to adjust.
1
Reply
Replying to @chrisax212
On Wikipedia, I read the following "Keystone modules have a rectangular face of 14.5mm wide by 16.0mm high.
Source: https://en.wikipedia.org/wiki/Keystone_module
I won't be able to measure it myself until tomorrow evening, but really have no doubt that this is incorrect
0
Reply
Replying to @Niels_NL
Perfect, I added a additional file "front-side-keystone-beta.3mf".
Let me know if it will fit.
0
Reply
question: how long is the cord you have rolled up?
The designer has replied
0
Reply
The reel on the picture has 15m on it, should be 3*1,5mm²
(Edited)0
Reply
Thanks for the update. It's exactly what I need. I will be printing as soon as the plate is cleared.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld